 |
|
|
|
|
Nissan Skyline
A sensor we are often asked for, is one to fit the Nissan Skyline and Stagea Import. After much work we have found sensors that we think fit the bill. From customer feedback it appears Nissan used both Zirconia and Titania 3 wire lambda sensors on these vehicles with two different plug types. Skyline1 is the most common type fitted.
The Zirconia type used on the Skyline are always 18mm thread - 22mm spanner size and the Titania type
are 12mm thread - 17mm spanner size. Several customers have purchased these with good results.
Further information is at James Deakins Facts Page
Important:
Some Nissan Zirconia sensors use a RED wire which is normally used on Titania sensors.
Please do not use wire colours to determine if Zirconia or Titania sensors are fitted, always refer to the thread / spanner size.
|
| Part No |
Fitment |
|
| Skyline1 |
3 Wire Nissan Skyline Zirconia 18mm Thread, Oval plug |
 |
| Skyline3 |
3 Wire Nissan Skyline Titania 12mm Thread, Oval plug |
|
| Skyline4 |
3 Wire Nissan Skyline Titania 12mm Thread, Square plug |
|
| Skyline6 |
1 x Skyline3 and 1 x Skyline4 |
|
|
|
|
|
|
